Effortless Setup Guide for Your KIOSK Printer in 5 Simple Steps

-

Introduction: Setting up your KIOSK printer is essential for seamless operations. Follow these straightforward steps to get your printer up and running quickly.

KIOSK Printer


Step-by-Step Guide:

Step 1: Unboxing and Inspection


Before getting started, carefully inspect the printer to ensure all components are present and undamaged.

Step 2: Connect Power and Cables


Connect the printer to the power source and necessary cables. Ensure a secure and correct connection.

Step 3: Open the test Printer tools


the test tools you can download it from HSPOS Website, as below linkshttps://www.hsprinter.com/en/download/Printer-test-tools.html

you can try to choose the com port and set the baud rate and click the Open Port


if the printer connected without issue, when you click the PrintText, It will print out.

if not, you can check the Baud Rate, rs232 cable and power adapter.



Step 4: Configure Printer Settings


About the setting the printer , you can download the tools from HSPOS website as below

https://www.hsprinter.com/en/download/Printer-Setting-Tools.html

you can connected with the printer by com port , and setting all founctions.

Follow the user manual or guidelines provided by the manufacturer to configure printer settings such as paper size and print quality.


Conclusion: Your KIOSK printer is now successfully set up and ready for use!

Ensure the images complement the written instructions, providing clear visual guidance for each step. Incorporate relevant keywords and descriptive titles to enhance the visibility of the page in search engine results.

Comments

Post a Comment

Popular posts from this blog

How to register the Nicelabel Barcode software by free

-
Image
1.          Prepare Tools: a)          Nicelabel-Prosuite5.exe Software, b)          Keygen.exe tools to Register it. you can download the tools on below link http://1drv.ms/1MbFvcn 2.          Installed the Nicelabel software. Double-click this software name "Nicelabel-Prosuite5.exe" 3.          Please keep click"Next" until see "Select the software edtion you want to install" choose the Nicelabel suite.  4 .          Choose the "Full installation" Click "Next" until finish installation. 5.          After your installed the software, you can open the software and see below window asked for Activation the software.  Please choose the "Activate the package(you have Aleady purchased the Product)" and click "Next" 6.          after you click "Next". you can see below windows, please choose the "Single User Software Key" 7.          When you can see Manage Licen
Read more

zebra label printer not printing

-
Image
GK888T zebra Label Printer not printing  If the Printer does not print after clicking “Print”, it has below several causes: 1, Label Printer install error, Please check whether the USB cable and power cord is well connected and the power switch is on. Check the ribbon or Label is installed right. (Please see the installed video of GK888T). 2, point out errors by Task Status.  2.1, Check the printer driver icon status and the print task status to diagnose       a), Click “ Start ” and select “set”-----“Devices”----- “ Devices and Printers ” . b), Click “ZDesigner GK888t” printer and right click “See what’s printing”. Click “Printer” and check whether “Use printer offline” is selected, if it is, then cancel it. c), Wrong port is selected in the driver.  Right click the printer driver icon, select “ Printer Properties ” , and correct the “ Port ” selection under the “ Port ” tab.  You can try to selection the USB port one by one and test it. 2:
Read more