Posts

Showing posts from August 18, 2016

zebra label printer not printing

Image
GK888T zebra Label Printer not printing  If the Printer does not print after clicking “Print”, it has below several causes: 1, Label Printer install error, Please check whether the USB cable and power cord is well connected and the power switch is on. Check the ribbon or Label is installed right. (Please see the installed video of GK888T). 2, point out errors by Task Status.  2.1, Check the printer driver icon status and the print task status to diagnose a), Click “Start” and select “set”-----“Devices”-----“Devices and Printers”.


b), Click “ZDesigner GK888t” printer and right click “See what’s printing”. Click “Printer” and check whether “Use printer offline” is selected, if it is, then cancel it. c), Wrong port is selected in the driver.  Right click the printer driver icon, select “Printer Properties”, and correct the “Port” selection under the “Port” tab.  You can try to selection the USB port one by one and test it.

2: GK888T Label Printer just can printing one label and the printer light bl…