How to connect Cash Register scales with PC software by USB

-
As USB port of the Cash Register scales is virtual com port, we still connect the scales by com port. We need check the virtual com port number on the pc after the scales connect with the PC by USB.

1, open the Device management to check the Virtual COM port number, it is com4 in my PC.

2,Open the PLU software—communicate setting to set the port com4 and Baudrate 9600.
 
3, Click-ok, the scales connect with PC software s

Comments

  1. Anonymous7 April 2022 at 19:22

    How To Connect Cash Register Scales With Pc Software By Usb >>>>> Download Now

    >>>>> Download Full

    How To Connect Cash Register Scales With Pc Software By Usb >>>>> Download LINK

    >>>>> Download Now

    How To Connect Cash Register Scales With Pc Software By Usb >>>>> Download Full

    >>>>> Download LINK sR

    ReplyDelete

Post a Comment

Popular posts from this blog

How to register the Nicelabel Barcode software by free

-
Image
1.          Prepare Tools: a)          Nicelabel-Prosuite5.exe Software, b)          Keygen.exe tools to Register it. you can download the tools on below link http://1drv.ms/1MbFvcn 2.          Installed the Nicelabel software. Double-click this software name "Nicelabel-Prosuite5.exe" 3.          Please keep click"Next" until see "Select the software edtion you want to install" choose the Nicelabel suite.  4 .          Choose the "Full installation" Click "Next" until finish installation. 5.          After your installed the software, you can open the software and see below window asked for Activation the software.  Please choose the "Activate the package(you have Aleady purchased the Product)" and click "Next" 6.          after you click "Next". you can see below windows, please choose the "Single User Software Key" 7.          When you can see Manage Licen
Read more

zebra label printer not printing

-
Image
GK888T zebra Label Printer not printing  If the Printer does not print after clicking “Print”, it has below several causes: 1, Label Printer install error, Please check whether the USB cable and power cord is well connected and the power switch is on. Check the ribbon or Label is installed right. (Please see the installed video of GK888T). 2, point out errors by Task Status.  2.1, Check the printer driver icon status and the print task status to diagnose       a), Click “ Start ” and select “set”-----“Devices”----- “ Devices and Printers ” . b), Click “ZDesigner GK888t” printer and right click “See what’s printing”. Click “Printer” and check whether “Use printer offline” is selected, if it is, then cancel it. c), Wrong port is selected in the driver.  Right click the printer driver icon, select “ Printer Properties ” , and correct the “ Port ” selection under the “ Port ” tab.  You can try to selection the USB port one by one and test it. 2:
Read more